- Low energy consumption
- Low maintenance
The POLO Fine Filter FFR is a closed in-line filter system for the fully automatic cleaning of a wide variety of liquids.
The special feature is the backwash filter inserts. The ultra-fine filter can filter up to 3 μm particles despite different volume flows.
Special filter inserts even manage up to 1 μm.
The ultra-fine filter is mounted on a two-chamber tank which consists of a dirty and clean side. The dirty medium is transferred to the dirty chamber. By means of a filter circuit pump, the medium is forced through the ultra-fine filter and enters the clean chamber. The backwash process is triggered depending on the differential pressure. The backwash is carried out with purified medium. The backwash material is passed on to a secondary filter system.
Made in Germany
|Standard sizes||FFR + Schrägbettfilter||FFR + Beutelfilter|
|Mounting dimesion L x W||1500 x 1500||1250 x 1250|
|Weight approx. (kg)||620||520|
|Content of tank approx. (litres)||880||510|
|Flow rate max. (l/min) emulsions*||100||100|
|Flow rate max. (l/min) oils*||50||50|
|Connceted load (kW)||5,54||8,1|
|Supply voltage||3 ~ 400 V 50 Hz||3 ~ 400 V 50 Hz|
|Compressed air connection||6 bar||6 bar|
*Definition of flow rate: Emulsions and aqueous media approx. 1 mm²/sec at 20 °C and oils up to 15 mm²/sec at 20 °C.
The maximum flow rate of the filter is indicated; depending on the machining process and the degree of contamination, the flow rate may be lower.
Subject to technical changes in the interest of progress.